| Name | Type | Description |
| HoseReelType |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_HoseReelType |
 | Hose Reel Type | Identifies the predefined types of hose arrangement from which the type required may be set. |
 | ホースリールタイプ | あらかじめ定義済みのホース構成の型から必要な型を設定する識別。 |
|
| HoseReelMountingType |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_HoseReelMountingType |
 | Hose Reel Mounting Type | Identifies the predefined types of hose reel mounting from which the type required may be set. |
 | ホースリール装着タイプ | あらかじめ定義済みの取り付けホースリールの型から必要な型を設定する識別。 |
|
| InletConnectionSize |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
 | Inlet Connection Size | Size of the inlet connection to the hose reel. |
 | インレット接続サイズ | ホースリールへの入口接続のサイズ。 |
|
| HoseDiameter |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
 | Hose Diameter | Notional diameter (bore) of the hose. |
 | ホース径 | ホースの公称口径(内径)。 |
|
| HoseLength |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
 | Hose Length | Notional length of the hose fitted to the hose reel when fully extended. |
 | ホースの長さ | ホースホースリールに装着されたホースの公称長さ(全て伸ばされたときの)。 |
|
| HoseNozzleType |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_HoseNozzleType |
 | Hose Nozzle Type | Identifies the predefined types of nozzle (in terms of spray pattern) fitted to the end of the hose from which the type required may be set. |
 | ホースノズルタイプ | あらかじめ定義済みのホースの先端に取り付けられるノズルの型(放出パターンの観点から)から必要な型を設定する識別。 |
|
| ClassOfService |
P_SINGLEVALUE
/
IfcLabel
|
 | Class Of Service | A classification of usage of the hose reel that may be applied. |
 | サービスクラス | 適用されるホースリールの使用方法の分類。 |
|
| ClassificationAuthority |
P_SINGLEVALUE
/
IfcLabel
|
 | Classification Authority | The name of the authority that applies the classification of service to the hose reel (e.g. NFPA/FEMA). |
 | 分類認証機関 | ホースリールの分類認証機関の名称。(例 NFPA/ FEMA) |
|