| Name | Type | Description |
|---|
| ToiletType |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_ToiletType |
 | Toilet Type | Enumeration that defines the types of toilet (water closet) arrangements that may be specified where:-
BedPanWasher: Enclosed soil appliance in which bedpans and urinal bottles are emptied and cleansed.
Chemical: Portable receptacle or soil appliance that receives and retains excrement in either an integral or a separate container, in which it is chemically treated and from which it has to be emptied periodically.
CloseCoupled: Toilet suite in which a flushing cistern is connected directly to the water closet pan.
LooseCoupled: Toilet arrangement in which a flushing cistern is connected to the water closet pan through a flushing pipe.
SlopHopper: Hopper shaped soil appliance with a flushing rim and outlet similar to those of a toilet pan, into which human excrement is emptied for disposal. |
 | トイレ種類 | トイレ配置は下記に列挙された仕様となります。
便器洗浄機：便器と小便器が空にされ洗浄される周囲が囲まれた電気機器。
ケミカル：別々の容器で排泄物を受けて、保持し、化学的に扱われる、定期的に空にされる携帯用の容器または土機器。
ｼｽﾀｰﾝ直結型：ｼｽﾀｰﾝがが便器に直接密着して設置されたタイプ
ｼｽﾀｰﾝ分離型：ｼｽﾀｰﾝがﾊﾟｲﾌﾟを介して便器につながっているタイプ
汚物流し：ホッパーは土壌器具にデザイされており、汚物が流され空になります。 |
|
| ToiletPanType |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_ToiletPanType |
| Toilet Pan Type | The property enumeration Pset_ToiletPanTypeEnum defines the types of toilet pan that may be specified within the property set Pset_Toilet:-
Siphonic: Toilet pan in which excrement is removed by siphonage induced by the flushing water.
Squat: Toilet pan with an elongated bowl installed with its top edge at or near floor level, so that the user has to squat.
WashDown: Toilet pan in which excrement is removed by the momentum of the flushing water.
WashOut: A washdown toilet pan in which excrement falls first into a shallow water filled bowl. |
| 便器タイプ | Pset_SanitaryMountingEnumは下記に列挙された便器タイプとして定義されます。
サイホン式：流水を含むサイホンにより汚物が廃棄される便器
和式：便器が床面か淵の高さと同じに配置された便器。使用者はしゃがまなければならない。
ウォッシュダウン式：勢いよく洗い流すことにより便器をきれいにします
洗浄式便器：まず汚物が落ちその後、便器に水が流れます |
|
| PanMounting |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_SanitaryMounting |
| Pan Mounting | The property enumeration Pset_SanitaryMountingEnum defines the forms of mounting or fixing of the sanitary terminal that may be specified within property sets used to define sanitary terminals (WC’s, basins, sinks, etc.) where:-
BackToWall: A pedestal mounted sanitary terminal that fits flush to the wall at the rear to cover its service connections.
Pedestal: A floor mounted sanitary terminal that has an integral base.
CounterTop: A sanitary terminal that is installed into a horizontal surface that is installed into a horizontal surface. Note: When applied to a wash hand basin, the term more normally used is ‘vanity’. See also Wash Hand Basin Type specification.
WallHung: A sanitary terminal cantilevered clear of the floor. |
| 取付方法 | Pset_SanitaryMountingEnumは固定された衛生器具の接続点（トイレや洗面器、シンクなど）に取り付けられます。
・床置き壁排出：背面の壁に接続口を合わせること。
・台：床置きの衛生器具には基礎があること。
・カウンター：衛生器具の表層が水平に設置されていること。※手洗い台として設置された場合「化粧台」として扱うこと。また、洗面台種類の規格表を参照のこと。
・壁掛け型：衛生器具は片側固定がされ床から離れていること。 |
|
| Color |
P_SINGLEVALUE
/
IfcLabel
|
| Color | Color selection for this object |
| 色 | 要素の色。 |
|
| SpilloverLevel |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Spillover Level | The level at which water spills out of the terminal. |
| 水位 | 継手からの水位。 |
|
| NominalLength |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Nominal Length | Nominal or quoted length of the object. |
| 長さ | 要素の長さ。 |
|
| NominalWidth |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Nominal Width | Nominal or quoted width of the object. |
| 幅 | 要素の幅。 |
|
| NominalDepth |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Nominal Depth | Nominal or quoted depth of the object. |
| 深さ | 要素の深さ。 |
|
buildingSMART Data Dictionary
PSD-XML
Link to this page