7.6.4.22 Pset_WasteTerminalTypeGullyTrap

PSET_TYPEDRIVENOVERRIDE / IfcWasteTerminal / GULLYTRAP

Waste Terminal Type Gully Trap: Pipe fitting or assembly of fittings to receive surface water or waste water, fitted with a grating or sealed cover and discharging through a trap (BS6100 330 3504 modified)
: 表面水や廃水を受けるために取り付けられる、取付器具や配管(BS6100 330 3504)グレーチングや防臭弁を通して排出されるよう取り付けられる。

buildingSMART Data Dictionary

PSD-XML

NameTypeDescription
NominalBodyLength P_SINGLEVALUE / IfcPositiveLengthMeasure
Nominal Body LengthNominal or quoted length measured along the x-axis in the local coordinate system or the radius (in the case of a circular shape in plan) of the chamber of the gully trap.
呼称躯体長溝防臭弁の半径か局所座標系のＸ軸に沿って測定された呼称もしくは積算された長さ。
NominalBodyWidth P_SINGLEVALUE / IfcPositiveLengthMeasure
Nominal Body WidthNominal or quoted length measured along the y-axis in the local coordinate system of the chamber of the gully trap.
呼称躯体幅溝防臭弁の半径か局所座標系のＹ軸に沿って測定された呼称もしくは積算された長さ。
NominalBodyDepth P_SINGLEVALUE / IfcPositiveLengthMeasure
Nominal Body DepthNominal or quoted length measured along the z-axis in the local coordinate system of the chamber of the gully trap.
呼称躯体深さ溝防臭弁の半径か局所座標系のZ軸に沿って測定された呼称もしくは積算された長さ。
GullyType P_ENUMERATEDVALUE / IfcLabel / PEnum_GullyType
Gully TypeIdentifies the predefined types of gully from which the type required may be set.
防臭弁の種類設置する予定の溝をあらかじめ定義でタイプを確認します。
HasStrainer P_SINGLEVALUE / IfcBoolean
Has StrainerIndicates whether the gully trap has a strainer (= TRUE) or not (= FALSE).
ろ過装置溝の防臭弁がろ過装置を備えているかどうかの指示。
TrapType P_ENUMERATEDVALUE / IfcLabel / PEnum_TrapType
Trap TypeIdentifies the predefined types of trap from which the type required may be set.
防臭弁の種類セットされる予定の防臭弁のあらかじめ定義されたタイプを確認します。
OutletConnectionSize P_SINGLEVALUE / IfcPositiveLengthMeasure
Outlet Connection SizeSize of the outlet connection from the object.
排気口接続口サイズ要素からの接続口サイズ。
BackInletPatternType P_ENUMERATEDVALUE / IfcLabel / PEnum_BackInletPatternType
Back Inlet Pattern TypeIdentifies the pattern of inlet connections to a gully trap. A gulley trap may have 0,1,2,3 or 4 inlet connections and the pattern of their arrangement may vary. The enumeration makes the convention that an outlet is either vertical or is placed at the bottom (south side) of the gully trap (when viewed in plan). Position 1 is to the left (west), position 2 is to the top (north), position 3 is to the right (east) and position 4 is to the bottom (south).
InletConnectionSize P_SINGLEVALUE / IfcPositiveLengthMeasure
Inlet Connection SizeSize of the inlet connection(s), where used, of the inlet connections. Note that all inlet connections are assumed to be the same size.
吸気口接続口サイズ吸気口接続口のサイズ。 注意：同サイズの吸気接続口がないものとします。
CoverLength P_SINGLEVALUE / IfcPositiveLengthMeasure
Cover LengthThe length measured along the x-axis in the local coordinate system or the radius (in the case of a circular shape in plan) of the cover of the gully trap.
カバーの長さ局所座標系のX軸に沿うか、半径（円状の形の場合）で測定された溝防臭弁カバーの長さ。
CoverWidth P_SINGLEVALUE / IfcPositiveLengthMeasure
Cover WidthThe length measured along the y-axis in the local coordinate system of the cover of the gully trap.
カバーの幅局所座標系のY軸で測定された溝防臭弁カバーの長さ。

Link to this page  Link to this page