8.15.4.2 Pset_ProfileArbitraryHollowCore

PSET_TYPEDRIVENOVERRIDE / IfcArbitraryProfileDefWithVoids

Profile Arbitrary Hollow Core: This is a collection of geometric properties of hollow core section profiles of precast concrete elements, to be used in conjunction with IfcArbitraryProfileDefWithVoids when profile designation alone does not fulfill the information requirements. In all cases, the cores are symmetrically distributed on either side of the plank center line, irrespective of whether the number of cores is odd or even. For planks with a center core with different geometry to that of the other cores, provide the property CenterCoreSpacing. When the number of cores is even, no Center Core properties shall be asserted. Key chamfers and draft chamfer are all 45 degree chamfers. The CoreTopRadius and CoreBaseRadius parameters can be derived and are therefore not listed in the property set. They are shown to define that the curves are arcs. The parameters for the center core are the same as above, but with the prefix "Center".

buildingSMART Data Dictionary

PSD-XML

Name	Type	Description
OverallWidth	P_SINGLEVALUE / IfcPositiveLengthMeasure	Overall Width Overall width of the profile.
OverallDepth	P_SINGLEVALUE / IfcPositiveLengthMeasure	Overall Depth Overall depth of the profile.
EdgeDraft	P_SINGLEVALUE / IfcNonNegativeLengthMeasure	Edge Draft Edge draft of the profile.
DraftBaseOffset	P_SINGLEVALUE / IfcNonNegativeLengthMeasure	Draft Base Offset Draft base offset of the profile.
DraftSideOffset	P_SINGLEVALUE / IfcNonNegativeLengthMeasure	Draft Side Offset Draft side offset of the profile.
BaseChamfer	P_SINGLEVALUE / IfcNonNegativeLengthMeasure	Base Chamfer Base chamfer of the profile.
KeyDepth	P_SINGLEVALUE / IfcNonNegativeLengthMeasure	Key Depth Key depth of the profile.
KeyHeight	P_SINGLEVALUE / IfcNonNegativeLengthMeasure	Key Height Key height of the profile.
KeyOffset	P_SINGLEVALUE / IfcNonNegativeLengthMeasure	Key Offset Key offset of the profile.
BottomCover	P_SINGLEVALUE / IfcPositiveLengthMeasure	Bottom Cover Bottom cover of the profile.
CoreSpacing	P_SINGLEVALUE / IfcPositiveLengthMeasure	Core Spacing Core spacing of the profile.
CoreBaseHeight	P_SINGLEVALUE / IfcPositiveLengthMeasure	Core Base Height Core base height of the profile.
CoreMiddleHeight	P_SINGLEVALUE / IfcPositiveLengthMeasure	Core Middle Height Core middle height of the profile.
CoreTopHeight	P_SINGLEVALUE / IfcPositiveLengthMeasure	Core Top Height Core top height of the profile.
CoreBaseWidth	P_SINGLEVALUE / IfcPositiveLengthMeasure	Core Base Width Core base width of the profile.
CoreTopWidth	P_SINGLEVALUE / IfcPositiveLengthMeasure	Core Top Width Core top width of the profile.
CenterCoreSpacing	P_SINGLEVALUE / IfcPositiveLengthMeasure	Center Core Spacing Center core spacing of the profile.
CenterCoreBaseHeight	P_SINGLEVALUE / IfcPositiveLengthMeasure	Center Core Base Height Center core base height of the profile.
CenterCoreMiddleHeight	P_SINGLEVALUE / IfcPositiveLengthMeasure	Center Core Middle Height Center core middle height of the profile.
CenterCoreTopHeight	P_SINGLEVALUE / IfcPositiveLengthMeasure	Center Core Top Height Center core top height of the profile.
CenterCoreBaseWidth	P_SINGLEVALUE / IfcPositiveLengthMeasure	Center Core Base Width Center core base width of the profile.
CenterCoreTopWidth	P_SINGLEVALUE / IfcPositiveLengthMeasure	Center Core Top Width Center core top width of the profile.
NumberOfCores	P_SINGLEVALUE / IfcCountMeasure	Number Of Cores Number of cores.

  Link to this page