| Name | Type | Description |
|---|
| ConnectionType |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_DuctConnectionType |
 | Connection Type | The end-style treatment of the duct port:
BEADEDSLEEVE: Beaded Sleeve.
COMPRESSION: Compression.
CRIMP: Crimp.
DRAWBAND: Drawband.
DRIVESLIP: Drive slip.
FLANGED: Flanged.
OUTSIDESLEEVE: Outside Sleeve.
SLIPON: Slipon.
SOLDERED: Soldered.
SSLIP: S-Slip.
STANDINGSEAM: Standing seam.
SWEDGE: Swedge.
WELDED: Welded.
OTHER: Another type of end-style has been applied.
NONE: No end-style has been applied. |
|
| ConnectionSubType |
P_SINGLEVALUE
/
IfcLabel
|
| Connection Sub Type | The physical port connection subtype that further qualifies the ConnectionType. |
|
| NominalWidth |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Nominal Width | The nominal width or diameter of the duct connection. |
|
| NominalHeight |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Nominal Height | The nominal height of the duct connection. Only provided for rectangular shaped ducts. |
|
| NominalThickness |
P_SINGLEVALUE
/
IfcLabel
|
The nominal wall thickness of the duct at the connection point.
|
| DryBulbTemperature |
P_BOUNDEDVALUE
/
IfcThermodynamicTemperatureMeasure
|
| Dry Bulb Temperature | Dry bulb temperature of the air. |
|
| WetBulbTemperature |
P_BOUNDEDVALUE
/
IfcThermodynamicTemperatureMeasure
|
| Wet Bulb Temperature | Wet bulb temperature of the air. |
|
| VolumetricFlowRate |
P_BOUNDEDVALUE
/
IfcVolumetricFlowRateMeasure
|
| Volumetric Flow Rate | The volumetric flow rate of the fluid. |
|
| Velocity |
P_BOUNDEDVALUE
/
IfcLinearVelocityMeasure
|
| Velocity | The velocity of the fluid. |
|
| Pressure |
P_BOUNDEDVALUE
/
IfcPressureMeasure
|
| Pressure | The pressure of the fluid. |
|
buildingSMART Data Dictionary
PSD-XML
Link to this page